- Contact us
- |
- About us
- |
- |
-
- Personal information
- Organization
- Quotes
- Address book
- Login
- Don't have an account? Sign-up
Cable connector shields
- Home
- EMI shielding cables & entries
- Cable connector shields
Series
These sleeves can create a more continuous connection where cable shields are interrupted.
They can be mounted afterward and are very flexible not only in lengths and the bending but also in diameter. For extra strength these can be clamped with cable clamps, tiewraps.
When you want the connection water tight, you can cover these with shrinking sleeves.
Technical details
Material | Silver plated 76% Nylon 24% elastic fiber fabric |
---|---|
Stretch | All directions |
Silver coating | 99.9% pure |
Surface resistivity | <0.5 Ohm/sq. (unstretched) |
Shielding Effect | 30- 60 dB in range 30 MHz - 20 GHz |
Resistance | <0.15 ohm /sq. (unstretched) between the shields based on optimal compression |
Temperature range | -30 to 90 °C |
Material thickness | 0.40 mm |
Stretch | ~100% |
Benefits
- In any size, diameter or length
- Conical version available to also create bigger steps in diameter
- Also possible with inside high flexible copper strips for higher currents
Length
These cable connector shields can be made in any desired length. You can specify the length at the end of the part number. For example, to have a quotation for Cable connector shields with a diameter of 8 mm and a length of 50 mm you can specify the part number as follows: 4955-8-50
From 16 mm diameter and on the sleeves can be reinforced with 0.12 mm copper strips. These strips are stuck on the inside of the sleeve, but on special order other connection parts are available.
The elasticity of the diameter is about 1:2, please take care that the strips need some initial contact force. The best is to send the cable assembly to us so that we can check the right fitting or contact our technical staff.
Standard sizes (4955 series)
Diameter range | Part number |
---|---|
2-4 mm | 4955-2 |
4-8 mm | 4955-4 |
8-12 mm | 4955-8 |
12-16 mm | 4955-12 |
16-20 mm | 4955-16 |
20-25 mm | 4955-20 |
25-30 mm | 4955-25 |
30-35 mm | 4955-30 |
40-45 mm | 4955-40 |
Larger diameters on request |
4956 - Conical cable connector shields series
The Conical sleeve is for connecting the braiding of the shield to bigger diameters, like connectors, receipticals, tubes or housings. This shield taper to create an optimal shield between 2 different diameters.
Begin diameter | End diameter | Part number |
---|---|---|
2-4 mm | 8-12 mm | 4956-2-8 |
4-8 mm | 12-16 mm | 4956-4-12 |
8-12 mm | 16-20 mm | 4956-8-16 |
12-16 mm | 22-26 mm | 4956-12-22 |
16-20 mm | 25-30 mm | 4956-16-25 |
20-25 mm | 30-35 mm | 4956-20-30 |
25-30 mm | 35-40 mm | 4956-25-35 |
30-35 mm | 50-55 mm | 4956-30-50 |
40-45 mm | 70-75 mm | 4956-40-70 |
Larger diameters on request |