| Oriented Wire Shield 5711 - 5722 is a composite gasket material consisting of a large number of small wires embedded and bonded in solid or sponge silicone, or fluor silicone elastomer for oil-resistance.
The Material is used in military, industrial and commercial products requiring EMI suppression, grounding, or static discharge. It is very suitable for applications where an environmental or pressure seal is required.
The sponge version is used in cases of severe joint unevenness, or if lower closure forces or greater compressibility are required.
Dimensions
Standard sheet of 90 x900 mm but for bigger items they will be welded/joint together also to prevent waste of material
Part Numbers
| Material |
Part no. |
| solid silicone with monel wire |
5711 |
| solid silicone with aluminium wire |
5712 |
| solid fluorsilicone with monel wire |
5713 |
| sponge silicone with monel wire |
5721 |
| sponge silicone with aluminium wire |
5722 |
Benefits
- temperatures up to 220°C
- high shielding performance
- water sealing, up to 10m. of water
- pressure resistant
- salt spray / chemical resistant
- fluor-silicone rubber for fuel/oil-resistance
- supplied as sheets, strips or die-cuts
Available thicknesses:
0.81, 1.13, 1.38, 1.57, 2.40, 3.18, 3.96, 4.78, 6.35 mm. Other thicknesses on request.
|
Ordering information
When ordering Flatshield 5700, please specify part number and dimension. For die cuts, please enclose a detail drawing.
 |
|
EMI shielding,EMC,RFI,shielded,shielding,conductive tape,honeycombs,emi gaskets,conductive glue 
