This heat-proof silicone rubber can make an emi-proof and a pressure watertight seal in narrow constructions.
also for EMP protection and against static electricity. Also available in fluor silicone rubber for resistance against ( hydraulic) oil and fuels.
The rubber can be filled with silver, nickel, silvered glass, silvered aluminum or graphite ( only for ESD) . Also for wave-guide applications.
As it absorbes high frequencies, conductiver rubber shows a shielding effect of 60 dB at 30MHz ~ 10GHz. Owing to its excellent conductivity, grounding and shielding effect, it is well suited for military communication equipment.. It can be manufactured in various shapes such as sheets, moulded parts, die-cut, strips, o-rings, etc.
The rubber has the following characteristics:
- Available in any thickness - max. 6 mm, 5 mm, 4 mm, 3 mm, 2 mm, 1 mm
- Excellent electric conductivity all over the surface across the thickness
- Excellent electromagnetic shielding effect
- High workability for adhesion
- Easy die-cutting, kiss-cutting and slitting
- Size of sheet type: max. 300 x 210 mm
Specifications
Material (base/material) |
Conductive Rubber |
Tensile Strength at Break (Kgf/cm2) |
13 |
Width (mm) |
200 x 1000 |
Thickness (mm) |
0.2 ~ 2 Posible to 5 |
Elongation at Break (%) |
120 |
After Aging Tensile Strength at Break % |
112 |
After Aging Elongation at Break (%) |
92 |
Ozone Resistance (KN/m) |
Good |
Shielding Effectiveness (dB) |
70 ~ 100 dB
(10 ~ 1000 Mhz) |
Temperature Range ( ºC) |
-30 to + 100 |
Tensile Strength (Mpa) |
4.43 |
Resistivity Vertical( Ω/cm) |
0.05 (Max) |
Resistivity Horizontal ( Ω/cm) |
0.1 (Max) |
Hardness Shore Micro |
55 ± 5 |
Application
- Conductive Rubber can be used easily for cabinet and housing gaskets
- Conductive Rubber is used for gaskets for other special uses
- Conductive Rubber is used to eliminate static electricity
Ag/Cu Silicone Rubber (silver) 5750 S series |
Thickness (mm) |
0.25 |
0.3 |
0.4 |
0.5 |
0.6 |
0.8 |
1.0 |
1.2 |
1.5 |
1.7 |
2.0 |
2.5 |
3.0 |
Part number |
025 |
030 |
040 |
050 |
060 |
080 |
100 |
120 |
150 |
170 |
200 |
250 |
300 |
Ni-Graphite Rubber (dark gray) 5750 DG series |
Thickness (mm) |
0.25 |
0.3 |
0.4 |
0.5 |
0.6 |
0.8 |
1.0 |
1.2 |
1.5 |
1.7 |
2.0 |
2.5 |
3.0 |
Part number |
025 |
030 |
040 |
050 |
060 |
080 |
100 |
120 |
150 |
170 |
200 |
250 |
300 |
Availability
- Sheets
- Moulded parts
- Die-cut
- Strip
|
Ordering Information
Please mention part numbers as shown in the table above.
Example
For Ag/Cu Silicone Rubber, thickness 0,8 use part number: 575080 S
For Ni-Graphite Rubber, thickness 1,7 use part number: 575170 DG
|
?/p>
|
EMI shielding,EMC,RFI,shielded,shielding,conductive tape,honeycombs,emi gaskets,conductive glue 
